Why you should consider having an engineer descale your boiler

Please note, the below is a brief rundown of the steps an expert will undertake. We do not recommend that you attempt to undertake this job this yourself, as this will need to be completed by a fully qualified engineer.

Why is it important to descale a boiler?

The formation of limescale inside a boiler is a common problem, but one that can be easily fixed. It’s caused through the build-up of calcium carbonate which is naturally present in hard water. Limescale is more commonly seen on appliances that run on hot water. This is because hot water evaporates from surfaces at a much faster rate than cold water.

As boilers are more susceptible to limescale, it’s important to regularly descale it to ensure it continues to work as it should. By removing limescale from the pipes, this can prevent potential leaks or even pipe rupture. As a result, water can flow freely through the pipes to ensure effective boiler performance.

For more information about boiler cover, plus our other home emergency cover packages including plumbing and drainage, get in touch with our friendly team who can provide you with a free quote in minutes or get a quote online.

How a Gas Safe Registered engineer will descale your boiler

This is how an expert will descale your boiler. It’s important not to undertake this task yourself.

• They will ensure the boiler is switched off and reaches a safe, ambient temperature to avoid burning themselves

• Carefully remove the top and front of the boiler using a screwdriver, allowing the Gas Safe registered engineer access to the heat exchanger

• Pour a boiler descaling product into the expansion tank. An expert will use a relatively mild product rather than a harsher one, as these can sometimes increase the risk of corrosion

• Switch your boiler back on for you. Once it reaches a warm temperature that you’re comfortable with, the Gas Safe registered engineer will allow the descaling liquid to circulate through the system for at least two hours. Establish that all valves are open, and the pump is set to maximum flow

• Then drain and flush the boiler system a couple of times

• For especially grimy or foul-smelling boiler systems, they will continue to repeat this process a few times until they’re confident that your boiler’s performance has improved.

Looking to save money on insurance? From boiler and heating protection to plumbing and drainage, and appliance cover, we’ve got a plan to suit every need and budget. Get a free quote online in just minutes and see how much you could save. Or find out more about how protection against unexpected events can help you keep life running smoothly.